Lee Aanderud's
1965 Chevrolet C-10

Lexington, SC

 
This truck was purchased on October 17, 2006 for $1600 from a suburb outside of Dallas, TX and picked up on November 4, 2006.  The truck came with factory A/C, factory tachometer, and a big rear window.  It also came with an interesting brush guard that I probably won't put back on.  The truck had a 1966 Chevrolet 327 car engine and 3-speed manual transmission installed but neither had been run for quite some time.  My plans are to do a complete restoration of the truck to "driver" condition, but replace the Chevy engine with a rebuilt 331 Hemi from a 1954 Chrysler New Yorker and a Chrysler 727 automatic transmission.  The original plans were to cut the truck down to short bed specs... but after seeing Van Pershing's C-20 truck I quickly changed my mind.  Now the plans are to make a truck similar to his.  Adding saddle tanks and gas filler doors will break up the long flat space between the cab and the rear wheel... which I never liked and was the main reason for wanting a short bed. 

Progress:

Pictures sent by seller prior to purchase (10/06)

Truck pick up and delivery (11/05/06)

Moving under it's own power (12/03/06)

Cleaned gauge cluster and added a Pontiac vacuum gauge (01/07/07)

Bed removal and rear end clean up (01/15/07)

Rear suspension rebuild and rear frame painting (01/27/07)

331 Hemi engine test fit - Day 1 (02/25/07)

331 Hemi engine test fit - Day 2 (02/27/07)

Rear Brake Rebuild and Seat Removal (03/11/07)

Motor Mount & Power Steering Box Installation (04/22/07)

Transmission Mount Fabrication & Brake Booster Installation (08/19/07)

Cab Removal, Cross Member Modification & Frame Clean Up (09/30/07)

Valve Cover Restoration (10/04/07)

Front Suspension & Disk Brake Installation (10/14/07)

Rocker panel removal and repair, welding holes & loading for the sandblaster (11/11/07)

Body panels sandblasted, primed and cab floor and inner rocker panels replaced (11/25/07)

Fender and Floor Repair and POR-15 Body Panels (01/13/08)

Initial Body Work on Fenders, Cab and Hood (02/10/08)

Body Work on Cab, Fenders and Hood (03/02/08)

Rear Bumper Modification & Straightening (04/12/08)

Door & Hood Bodywork and Priming (04/13/08)

More Bodywork on Fenders, Cowl, & Front Panel (04/27/08)

More Sanding & Seat Test Fit (05/18/08)


1965 Chevy C-10 Extended Cab (Photoshop) (10/06/06)

Home